Denon
DRA-100
DRA-100
Couldn't load pickup availability
Specifications
Audio section
Audio amplifier
|
Rated output: |
2-channel driving |
|
|
Dynamic power: |
70 W + 70 W |
|
|
Output connectors: |
Speaker: 4-16 Ω/ohms (impedance) |
|
|
Input sensitivity/impedance: |
Analog In: 200 mV/22 kΩ/kohms |
|
|
Total harmonic distortion |
Analog In: 0.04 % |
|
|
S/N ratio (35 W, 8 Ω/ohms, IHF-A): |
Digital In : 110 dB |
|
|
Tone control: |
Bass : ±8 dB (100 Hz) |
|
|
Frequency response: |
Analog In : 20 Hz – 96 kHz |
Wireless LAN section
|
Network type (wireless LAN standard): |
Conforming to IEEE 802.11b |
|
Security: |
WEP 64 bit, WEP 128 bit |
|
WPA/WPA2-PSK (AES) |
|
|
WPA/WPA2-PSK (TKIP) |
|
|
Radio frequency: |
2.4 GHz |
|
No. of channels: |
1 – 13 ch |
The Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product Logo are registered trademarks of the Wi-Fi Alliance.
Bluetooth section
|
Communications system: |
Bluetooth Version 2.1 + EDR (Enhanced Data Rate) |
|
Transmission power: |
Maximum 2.5 mW (Class 2) |
|
Maximum communication range: |
Approx. 10 m in line of sight∗2 |
|
Frequency band: |
2.4 GHz band |
|
Modulation scheme: |
FHSS (Frequency-Hopping Spread Spectrum) |
|
Supported profiles: |
A2DP (Advanced Audio Distribution Profile) 1.2 |
|
AVRCP (Audio Video Remote Control Profile) 1.4 |
|
|
Corresponding codec: |
SBC, AAC |
|
Transmission range (A2DP): |
20 Hz - 20,000 Hz |
The actual communication range varies depending on the influence of such factors as obstructions between devices, electromagnetic waves from microwave ovens, static electricity, cordless phones, reception sensitivity, antenna performance, operating system, application software etc.
General
|
Power supply: |
AC 220 - 230 V, 50/60 Hz |
|
Power consumption: |
60 W |
|
Power consumption in standby mode : |
0.3 W |
|
Power consumption in “Network Control” – “On” mode: |
3 W |
For purposes of improvement, specifications and design are subject to change without notice.
